PRODUCT

Siloxane Transparent Primer

Brand: RA&Sons

SILOXANE TRANSPARENT PRIMER is a colourless primer aimed at treating interior and exterior walls prior to the application of SILOXANE PAINT. It is available in 1ltr, 5ltr and 25ltr sizes.

Surface Preparation

All surfaces should be sound, dust free and clear of any surface contaminants like oil, grease or salt efflorescence.

 

Application

SILOXANE TRANSPARENT PRIMER can be diluted with clean water to a ratio of 1:1 and then applied by brush or roller until the substrate is completely covered.

 

Recommendations

Do not use SILOXANE TRANSPARENT PRIMER:

  • At temperatures below +5°C or above +35°C

 

 

Siloxane Acrylic Binding Primer

Packaging & Storage

SILOXANE TRANSPARENT PRIMER is supplied in 1L, 5L or 25L plastic containers and can be stored up to 6 months in a cool dry place, in its original unopened packaging

Safety Notice

Before using SILOXANE TRANSPARENT PRIMER it is recommended to consult the product safety data sheet available on request

Technical Data

Type of Binder
Acrylic/ Siloxane Emulsion
Coverage (Theoretical)
12.5m²/L
Brilliance 85° GARDNER (BS EN ISO 2813)
21 (Semi-gloss)
Minimum Film Forming Temperature
'+5°C
Density
1.04 Kg/L
Solid Content
55%
Cat VOC in Accordance with dir EU 2004/42/CE cat. A/h Binding Primer
30g/L
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2022