MOULDSTOP is the final finish coat in the MOULDSTOP system. It has been specially formulated to resist future mould growth helped by its breathability. It has good abrasion resistance and is highly washable. For interior use only it is available in white and can be tinted to colours upon request and it comes in 5L and 14L tubs.
The surface to be painted should already have been treated with RASAN and MOULDSTOP PRIMER so it should already be sound, dust free and clear of any surface contaminants like oil, grease, salt efflorescence or flaking paint. Fill any imperfections in the substrate.
Dilute MOULDSTOP with 10% clean water and stir the paint thoroughly. Apply the paint by brush or roller allowing at least 4 hours between coats. Apply two coats. If MOULDSTOP is to be used on newly plastered walls and ceilings prime first with RAPRIMER allow to dry and then apply two coats of MOULDSTOP as per above.
Do not use MOULDSTOP: