Racoat Acrylic Cover

Brand: RA&Sons

RACOAT ACRYLIC COVER is a ready mixed durable and flexible UV-resistant acrylic render. It can be applied externally over a variety ofsubstrates and is available in various colours and two different sizes, FINO (1.2mm) and MEDIO (1.5mm)


High Thickness Acrylic Cover

Packaging & Storage

ACRYLIC COVER is supplied in 25Kg buckets and can be stored up to 6 months in a cool dry place, in its original packaging

Safety Notice

Before using ACRYLIC COVER it is recommended to consult the product safety data sheet, available on request

Surface Preparation

Any areas of mold or algae should be pretreated with RASAN, the substrate should then receive one coat of RACOAT ACRYLIC PRIMER diluted with 10% of water. Allow to dry for 12 hours.



Apply ACRYLIC COVER with a steel trowel to a uniform depth of 1.2mm (FINO) or 1.5mm (MEDIO). While the product is curing but before it dries use a plastic finish trowel in a circular motion to give a textured final finish. Make sure all tools are cleaned thoroughly with water after use.




  • At temperatures below +8°C or above +35°C
  • When strong wind or rain is forecast or when there is high humidity expected.

Once the render has been applied. the surface must be protected from rainfall for at least 48 hours.

Technical Data

1.78 Kg/L
Binding Agent
Acrylic copolymer
White or Colour Chart
Ready to Use
Fine 1.2mm/ Medio 1.5mm
Coverage (theoretical)
1.2mm: 2.1Kg/1m² 1.5mm: 2.5Kg/1m²
Min. Reticulation Temperature
Volume Solid Content
85% Approx
VOC According to dir 2004/42/CE Cat. A/c Exterior wall of Mineral Substrate
Impact Resistance
Category II
Permeability to Water Vapour
V = 85(g/m² d
Water Permeability
W = 1.3 (Kg/m²)h½ - (classII)
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other products

Sign up for our Newsletter
envelope-ohomeenvelope-squarebuilding linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram